Back to Blog
Tips & Care 2026-11-14 Cryptozoic Entertainment 0 views

Cryptkins Unleashed Damnation Figure: Display and Care Tips

Cryptkins Unleashed Damnation Figure: Display and Care Tips

Keep your LACC Exclusive Damnation Cryptkins Unleashed figure looking sharp with practical display, dusting, and storage advice for this limited 300-piece vinyl variant.

Start with what makes this figure different

The Damnation figure is a 5.25-inch vinyl variant of the Cerberus Cryptkins Unleashed sculpt, created exclusively for L.A. Comic Con 2021. It stands out for its spooky skull spots, each one representing a damned soul trapped inside, and it ships in a window box with a foil “Exclusive Species” sticker. Because only 300 were produced, your display and care choices matter more than they would for an open-run figure.

The supplied product information does not include a specific age range, cleaning instructions, or material composition beyond “vinyl.” Treat the guidance below as general good practice for a painted vinyl collectible, not as a manufacturer procedure. When in doubt, less handling and less moisture are safer.

Key details that shape your care routine

How to display the Damnation figure safely

Use these steps as a starting point for a stable, low-risk display. Adjust based on your space and how often you handle the figure.

  1. Choose a stable, shaded spot: Place the figure on a shelf or cabinet where it won’t be knocked over. Avoid direct sunlight and heat sources, which can fade paint or warp vinyl over time.
  2. Keep the window box intact: If you display the figure out of the box, store the window box and foil sticker flat in a dry place. The box is part of the exclusive presentation and helps tell the LACC story.
  3. Limit handling: Handle the figure by the base or solid areas, not the skull spots or thin details. Wash and dry your hands first to avoid transferring oils to the paint.
  4. Leave breathing room: Don’t press the figure against other collectibles or pack it tightly against a wall. A little space reduces scuffs and makes dusting easier.

Dusting and cleaning without damaging the paint

The supplied information does not include a cleaning method, so use conservative habits. Start dry and gentle; avoid soaking or scrubbing.

  • Use a soft, dry brush: A clean makeup brush or soft paintbrush lifts dust from the skull spots and crevices without abrasion.
  • Skip harsh cleaners: Avoid alcohol, acetone, and abrasive polishes. If a dry brush isn’t enough, a barely damp cloth with plain water is safer, but dry immediately and never submerge the figure.
  • Dust the window box separately: Wipe the outside of the window box with a dry microfiber cloth. Keep moisture away from the foil sticker and cardboard edges.

Storing the figure and its packaging

If you rotate your display or need to pack the figure away, store it in a cool, dry place away from direct light. Keep the window box flat and supported so the foil sticker doesn’t crease. Because the figure is a limited edition of 300, avoid stacking heavy items on top of the box.

The product information notes that the figure shipped to the U.S. and Canada only and that purchases were non-refundable. That doesn’t affect day-to-day care, but it does mean you can’t easily replace a damaged figure through the original sale. A little preventive care goes a long way.

Packaging and purchase details to keep in mind

Related Articles

Customer Service
Home
Products
Cart
Profile