Multiverse Box Replacement Event Cards Guide

Quick answer

The Multiverse Box replacement event cards fix the incorrect card backs from the original release. Use this guide to swap them in correctly and avoid confusion during gameplay.

How to replace and use the event cards

1. Remove the original event cards: Take the two event cards that came with your Multiverse Box out of the event deck. Check their backs against the other cards in the box — if the backs look different, those are the ones to replace. Keep the original cards aside in case you ever need a reference copy.
2. Insert the replacement cards: Place the two new event cards from the replacement pack into the same positions in the event deck. The correct backs should now match every other card in the Multiverse Box. Shuffle the event deck gently after inserting to avoid damaging the cards.
3. Verify the fix during setup: Before starting a game, draw the top event card and compare its back to a main deck card. If they match, the replacement is successful. If not, double-check that you removed the original cards. If the backs still mismatch, you may have left an original card in the deck by mistake.

Product details

• DC Deck-Building Game: Multiverse Box - Replacement Event Cards: Release Date: May 2024. Contains 2 standard (2.5” x 3.5”) Event cards with the correct card backs. These are the only official fix for the back-design error, so you can play without worrying about marked cards or rule disputes.