Start with the statue's real dimensions and materials
The Wonder Woman: Princess of Themyscira Statue — Silver Edition is a hand-painted polyresin piece that measures nearly 14 inches from the base of the plinth to the top of the spear. That height matters before you choose a shelf: you need clearance for the spear tip, not just the figure. Because the spear is removable, you can also display the statue without it if your shelf is tight, but the supplied information does not describe a recommended storage method for the detached spear.
This is a limited edition of 500 pieces, individually numbered on the base, and it ships in a full-color closed box with a CZX super-premium card. Treat the box and card as part of the collectible rather than packing waste. The statue is part of Cryptozoic's Pantheon of Justice series and is a shared Sideshow/Cryptozoic Exclusive, so the display choices you make should protect both the finish and the complete package.
Catalog facts that affect display and care
- Wonder Woman: Princess of Themyscira Statue — Silver Edition: Measures nearly 14 inches tall from base to tip of spear Shelf height and depth must accommodate the full spear tip, not just the figure.

Wonder Woman: Princess of Themyscira Statue — Silver Edition - Wonder Woman: Princess of Themyscira Statue — Silver Edition: Hand-painted polyresin statue with silver-accented accessories and spear The painted finish and silver accents are the surfaces you need to protect from dust, oils, and abrasion.
- Wonder Woman: Princess of Themyscira Statue — Silver Edition: The spear is removable You can reduce the display height or handle the statue in two parts, but the supplied information does not specify a storage method for the detached spear.
- Wonder Woman: Princess of Themyscira Statue — Silver Edition: Individually numbered on the base and limited to 500 pieces The numbered base is part of the collectible's identity, so avoid abrasive cleaning or handling that could wear the numbering.
- Wonder Woman: Princess of Themyscira Statue — Silver Edition: Packaged in a full-color closed box with a CZX super-premium card Keeping the box and card protected preserves the complete package for storage or later resale.
Choose a shelf that fits the statue and its risks
A stable, enclosed or low-traffic shelf is safer than a high-traffic open surface. The statue is 14 inches tall, so measure the full height with the spear attached and add a little clearance above the tip. Avoid shelves near doors, open windows, heating vents, or anywhere the statue could be knocked. Because the piece is hand-painted polyresin, a shelf that receives direct sunlight for hours each day is not ideal for long-term display.
- Measure height with the spear in place: The catalog lists nearly 14 inches from base to spear tip. Confirm your shelf has that clearance before placing the statue.
- Check depth and base support: The plinth needs to sit fully on a flat, level surface. Avoid narrow ledges or shelves that flex.
- Keep it away from busy edges: A corner shelf or a cabinet with a door reduces the chance of accidental contact.
- Plan for the removable spear: If you remove the spear for display, store it where it will not roll or be crushed. The supplied information does not specify a recommended storage method, so use a padded, stable container.
Handle the statue by the base, not the accessories
When you move the statue, lift it from the plinth rather than the spear, lasso, or bracelets. The silver-accented accessories are painted details, and gripping them puts stress on small parts. If you need to remove the spear, do so over a soft surface such as a towel, and keep the detached spear away from the edge of the table. The supplied information does not include a recommended cleaning solution or handling procedure beyond the removable spear, so keep your approach conservative: clean, dry hands, a stable surface, and no tugging on delicate parts.
Dusting and cleaning without damaging the finish
The catalog does not supply a manufacturer-approved cleaning method, so use the least aggressive approach first. A soft, dry microfiber cloth or a clean, soft brush is safer than a wet cloth for routine dusting. Avoid household cleaners, abrasive pads, and solvents, which can dull the hand-painted finish or the silver accents. If a spot needs more attention, dampen a microfiber cloth with water and wring it out thoroughly, then dry the area immediately. Do not let water sit on the statue or seep into the base.
- Dust regularly with a dry soft cloth: Light, frequent dusting prevents buildup that can require more aggressive cleaning later.
- Support the statue while cleaning: Hold the base steady with one hand so the piece does not tip as you dust the upper body.
- Avoid spraying cleaner directly on the statue: Overspray can reach the numbered base, the card, or the box. Apply any moisture to the cloth, not the collectible.
- Dry immediately: Do not leave moisture on the polyresin or near the base numbering.
Humidity and temperature: protect the resin and the box
The supplied information does not include a specific humidity range for this statue, so avoid claiming one. A practical approach is to keep the statue in a stable indoor environment, away from damp basements, bathrooms, and rooms with frequent temperature swings. High humidity can affect the box and card even if the polyresin itself is sturdy. If you store the statue in its full-color closed box, add a desiccant packet to the storage bin and keep the bin in a dry closet rather than on a concrete floor. Check the box and card periodically for softness, warping, or musty odor, and address moisture before it spreads.
Display options: open shelf vs. enclosed cabinet
Both approaches can work. The right choice depends on your room, your traffic patterns, and whether you want to keep the CZX card and box on display or stored away.
- Open shelf: Easier to view from multiple angles, but more exposed to dust, sunlight, and accidental contact. Use a stable shelf away from walkways and consider a UV-filtering acrylic case if sunlight is unavoidable.
- Enclosed cabinet: Reduces dust and handling, and helps buffer humidity swings. Make sure the cabinet is deep enough for the 14-inch height and that the door does not strike the spear when opened.
- Box and card storage: Keep the full-color closed box and CZX card flat and dry, away from heavy objects. The card is part of the collectible, so avoid bending it or storing it loose with loose hardware.
What the supplied information does not cover
The catalog does not specify a manufacturer-recommended cleaning solution, humidity range, or long-term storage procedure for the detached spear. It also does not confirm whether the statue is suitable for outdoor display, direct sunlight, or enclosed display cases with active airflow. When in doubt, choose the more conservative option: stable temperature, low humidity, indirect light, and minimal handling. If you need to transport the statue, keep it in its original full-color closed box with padding around the spear, and carry the box upright.


